- Application: for making cutting tools, such as end mills, dental burs, reamer etc
- Diameter: 3mm to 30mm
- Length: 330mm/310mm or customized
- Material: WC+Co
DESCRIPTION
Cemented Carbide Blank Rods
The tungsten carbide rods (also named as cemented carbide rods), are used in making high quality carbide cutting tools for the machining of heat-resistant alloys, such as end mill, drill, reamer.
1. Type Specification: ØD×L
2. Application: for making cutting tools, for example end mills, dental burs, reamer etc.
3. Diameter: 3mm to 30mm
4. Length: standard 330mm/310mm or customized
5. Surface: blank or ground
6. Material: WC+CO
Product Name | Solid carbide rods blank and ground |
Material | WC+CO |
Grade | K05-K40 |
Grain Size | fine, medium |
Hardness | 87.6-94HRA |
T.R.S | 3000-4200 |
Surface | blank or ground |
Application | Used for manufacturing cutting tools such as endmills, drills, reamers and dental burrs |
Grade properties
Grade | ISO Code | Grain Size | Cobalt | Density (g/cm3) | Hardness (HRA) | T.R.S(Mpa) |
UBT05 | K05-K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 |
UBT10 | K05-K10 | 0.4 | 6.0 | 14.8 | 94 | 3800 |
UBT20F | K20-K40 | 0.8 | 10.2 | 14.5 | 91.5 | 3900 |
UBT20 | K20-K40 | 0.6 | 10.2 | 14.3 | 92.3 | 3800 |
UBT25 | K20-K40 | 0.4 | 12 | 14.1 | 92.5 | 4200 |
UBT30 | K30-K40 | 1.5 | 15 | 14 | 87.6 | 4000 |
Grade applications
Grade | Recommended application |
UBT05 | Drill, endmill and burr are recommended. Especially suitable for cutting non-ferrous metal and graphite (coating is needed) |
UBT10 | Ultrafine grain size, with good wear resistant. Higher wear resistant endmill and engraving tools are recommended. Suitable for cutting PCB and plastic |
UBT20F | Drill and endmill are recommended. Suitable for cutting general steel (HRC<48), grey cast iron, stainless steel and heat resistant alloy |
UBT20 | Drill and endmill are recommended. Suitable for cutting stainless steel, heat resistant alloy and cast iron |
UBT25 | Ultrafine grain size, high cobalt content with excellent hardness and toughness, endmill and reamer are recommended, especially suitable for cutting steel(HRC:45-55), aluminum alloy and titanium alloy |
UBT30 | Suitable for making punching of moulds, tools and anti-vibration boring bar etc |
Noted: we can produce tungsten carbide rods per customer's request